Categories

Manufacturers

ADAM Audio F7 Active Studio Monitor (Single)

Adam Audio F7 Studio Monitor is a nearfield solution for recording, mixing and mastering music, film, video and other scenarios that require vertical studio audio monitoring.

₹ 34,600.00

₹ 43,500.00

In stock
Item in stock
Availability date: 10/03/2017


 
Overview

The F7 features an ART tweeter that delivers extended frequency response up to 50 kHz, resulting in pristine, detailed and accurate high frequencies that are well suited for high-resolution audio of 96 and 192 kHz. The tweeter and mid-woofer are independently amplified with a 60W mid-woofer amplifier and a 40W tweeter amplifier. There are balanced XLR and unbalanced RCA connections on the rear, along with a power switch and volume control dial.

The F7 Speaker

The A7X in the AX series is Adam Audio's most popular model. With the F7, they offer a novel speaker with the same dimensions and a similar sound quality, but at a lower price point

Tweeter

The F7 ART tweeter features Adam Audio's proprietary Accelerating Ribbon Technology, which is the most famous of all Adam inventions, assuring for utmost clarity of the high frequencies

Mid-Woofer

The 7" carbon fiber/paper mid-woofer includes a 37mm voice coil. It has been designed to perfectly complement the ART tweeter. It excels in both the deep registers and the musically crucial midrange

Controls

Several rear panels controls adjust the monitors to the environment including: two room equalizers for the high (>5 kHz) and the low (<300 Hz) frequencies, as well as a volume knob (-∞ to +6 dB)

Mid-Woofer

Number per Device - 1

Basket - 7" (177mm)

Voice Coil - 1.5" (37mm)

Cone Material - Glass fiber/paper

Tweeters

Number per Device - 1

Type - ART (Accelerating Ribbon Technology)

Amplifier

Amplifiers - Mid-Woofer Amp x 1 Tweeter Amp x 1

Type - Mid-Woofer Amp: A/B Tweeter Amp: A/B

Amp Power RMS / Music - Mid-Woofer Amp: 60W / 85W Tweeter Amp: 40W / 55W

Control Methods

Input Sensitivity - -∞ to +6 dB

High Shelf EQ (> 5 kHz) - ±6 dB

Low Shelf EQ (< 300 Hz) - ±6 dB

General
  • Analog Inputs - XLR / RCA
  • Frequency Response - 44 Hz - 50 kHz
  • Peak Level - ≥109 dB (max)
  • Magnetically Shielded - No
  • Dimensions (HxWxD) - 12.5 x 9.0 x 10.5" (321 x 225 x 266mm)
 
Specification

 
Products Questions

Note : you need to login first to use this feature.

 
Comments(1)

Over the past decade, ADAM Audio has cut a wide swath into the studio monitor marketplace. Due to the proprietary Accelerating Ribbon Technology (ART) utilized in its folded ribbon tweeter designs, ADAM Audio is fairly equated with a natural, aurally pleasing and extended high frequency response (at a generally higher-end price point, too). F Series featuring ART, with an even further “eXtended” frequency response of “up to 50kHz”—is somehow a fair step down in capability and quality, too. Yet from what I’ve experienced, that assumption would be wrong; while the company does utilize Chinese manufacturing plants to assemble the F Series, its design, components, specifications and performance are spot-on for this aspirational German manufacturer. Reviewed here, the F7 is ADAM Audio’s larger of its two F Series full-range loudspeakers, featuring a 7-inch fiberglass/paper woofer and ART tweeter, powered by a Class A/B dual channel amplifier (35 W of continuous power transducer). The smaller F5 is available, different only by its woofer’s 5-inch diameter, a slightly smaller cabinet and 25 W/25 W amplifier. An F7 pair provides a maximum acoustic output of 109 dB SPL. Also available is the F Series’ SubF subwoofer featuring an 8-inch woofer and 110 W of Class A/B mono amplification at 107 dB SPL within a compact, 21.8 lb., 14” x 10” x 13.5” cabinet (the FSub was not included in this review package). The F Series cabinetry is made of an attractive, scratch-resistant MDF (medium-density fiberboard) of industry-standard level quality. The F7 features comprehensive analog input options—combo XLR/TRS and RCA jacks; a present RCA input automatically disables XLR/TRS input. Controls include rotary /-6dB shelving filter knobs, set at 5kHz and 300Hz, respectively; rotary level control, to 6dB ( 12dB for SubF); and—recommended for use with a subwoofer—80Hz high-pass filter on/off switch. The front panel provides a two LED logo panel; a green LED lights when power is on; a red LED lights in Standby, or low power mode, with its automatic signal sensing feature. Summary There are no gimmicks and few frills to be found in the F Series: just solid performance for the discriminating, yet budget-conscious and/or space-limited audio producer. - BY gaurav on October 18, 2017, 7:36 pm

Note : you need to login first to use this feature.

Recently Viewed

Menu

Left
Top
Compare 0
Cart 0